Suzuki Liana RH413, Service Manual

Page: 67 / 1302

Engine General Information and Diagnosis: 1A-16
Diagnostic Information and Procedures
Engine and Emission Control System Check
S3RH0A1104001
Refer to the following items for the details of each step.
Step Action Yes No
1 Customer complaint analysis )
1) Perform customer complaint analysis referring to
“Customer Complaint Analysis”.
Was customer complaint analysis performed?
Go to Step 2. Perform customer
complaint analysis.
2 DTC(s) / Freeze frame data check, record and clearance
)
1) Check for DTC (including pending DTC) referring to the
“DTC(s) / Freeze Frame Data Check, Record and
Clearance”.
Is there any DTC(s)?
Print DTC and freeze
frame data or write them
down and clear them by
referring to “DTC
Clearance”, and go to
Step 3. Go to Step 4.
3 Visual inspection )
1) Perform visual inspection referring to “Visual Inspection”.
Is there any faulty condition?
Repair or replace
malfunction part, and go
to Step 11. Go to Step 5.
4 Visual inspection )
1) Perform visual inspection referring to “Visual Inspection”.
Is there any faulty condition?
Repair or replace
malfunction part, and go
to Step 11. Go to Step 8.
5 Trouble symptom confirmation )
1) Confirm trouble symptom referring to the “Trouble
Symptom Confirmation”.
Is trouble symptom identified?
Go to Step 6. Go to Step 7.
6 Rechecking and record of DTC / Freeze frame data )
1) Recheck for DTC and freeze frame data referring to
“DTC Check”.
Is there any DTC(s)?
Go to Step 9. Go to Step 8.
7 Rechecking and record of DTC / Freeze frame data )
1) Recheck for DTC and freeze frame data referring to
“DTC Check”.
Is there any DTC(s)?
Go to Step 9. Go to Step 10.
8 Engine basic inspection and engine symptom diagnosis
)
1) Check and repair according to “Engine Basic Inspection”
and “Engine Symptom Diagnosis”.
Are check and repair complete?
Go to Step 11. Check and repair
malfunction part(s), and
go to Step 11.
9 Troubleshooting for DTC )
1) Check and repair according to applicable DTC diag. flow.
Are check and repair complete?
Go to Step 11. Check and repair
malfunction part(s), and
go to Step 11.
10 Intermittent problems check )
1) Check for intermittent problems referring to “Intermittent
Problems Check”.
Is there any faulty condition?
Repair or replace
malfunction part(s), and
go to Step 11. Go to Step 11.