Suzuki Liana RH413, Service Manual

Page: 660 / 1302

5A-112 Automatic Transmission/Transaxle:
68) Remove parking lock pawl shaft, then spring (2) and
parking lock pawl (1).
69) Screwing 3 bolts (1), remove reduction drive gear
(2).
CAUTION
!
Screw 3 bolts into reduction drive gear
uniformly, or reduction drive gear, bearing
and transaxle case may be damaged.
Bolt length
30 mm (1.20 in.)
70) Blowing compressed air from oil hole of oil pump,
remove 1st and reverse brake piston (1).
71) Remove parking lock pawl bracket (1).
72) With slotted screw driver, cut and unfold manual
valve lever spacer (1) and proceed to remove
manual valve lever spacer.
73) Using spring pin remover with 3 mm (0.12 in.) in
diameter and hammer, drive out manual valve lever
pin (1).
74) Remove manual shift shaft (2).
75) Remove parking lock pawl rod (2) from manual valve
lever (1).
I2RH0B510139-01
I2RH0B510140-01
I2RH0B510141-01
I2RH0B510142-01
I2RH0B510143-01
I2RH0B510144-01
I2RH0B510145-01