Suzuki Liana RH413, Service Manual

Page: 614 / 1302

5A-66 Automatic Transmission/Transaxle:
DTC P1700 (No. 32 or 33): Throttle Position Signal Circuit Malfunction
S3RH0A5104032
Wiring Diagram
DTC Detecting Condition and Trouble Area
DTC Confirmation Procedure
1) Connect scan tool to DLC with ignition switch OFF.
2) Clear DTCs in TCM and ECM memories by using scan tool.
3) Turn ignition switch ON.
4) Depress accelerator pedal fully and keep it for 10 seconds.
5) Release accelerator pedal and keep it for 10 seconds.
6) Check DTC, pending DTC and freeze frame data, if available.
4
C41 G04 G03
14
6
G08 G07
PPL/WHT
12V
3
G03-14 G07-6
2
1
I2RH0B510030-01
1. TCM 3. Terminal arrangement of TCM connector (viewed from harness side)
2. ECM 4. Terminal arrangement of ECM connector (viewed from harness side)
DTC detecting condition Trouble area
• Too short low signal of pulse signal from ECM to TCM
continues out of specification.
• Too long low signal of pulse signal from ECM to TCM
continues out of specification.
• Throttle position sensor or its circuit malfunction
• Throttle position signal circuit from ECM to TCM
open or short
• TCM
• ECM