Suzuki Liana RH413, Service Manual

Page: 569 / 1302

Automatic Transmission/Transaxle: 5A-21
DTC No.
Detecting item
Detecting condition
(DTC will set when detecting:)
A B
Type I Type II
— 12 No malfunction is detected — — —
)
P0705 34
Transmission range sensor
circuit malfunction • No sensor signal is inputted.
or
• Multiple signals are inputted
simultaneously.
*4
2 driving
cycle
*3 *4
2 driving
cycle
) P0710
36 Transmission fluid
temperature sensor circuit
malfunction Sensor output voltage is too high
1 driving
cycle
*3
1 driving
cycle
38
Sensor output voltage is too low
) P0715 14
Input / Turbine speed
sensor circuit malfunction No sensor signal is detected although
output shaft speed sensor signal is
detected.
1 driving
cycle
1 driving
cycle
) P0720 31
Output speed sensor / VSS
circuit malfunction No sensor signal is inputted although input
shaft speed sensor signal is inputted. 1 driving
cycle
1 driving
cycle
) P0725 35
Engine speed input circuit
malfunction No engine speed signal is inputted
although engine is running and engine
coolant temperature sensor signal is in
normal condition.
1 driving
cycle
1 driving
cycle
) *1
P0741
*1
29
Torque converter clutch
circuit performance or
stuck off • Difference in revolution between engine
and input shaft is too large although
TCM is commanding TCC solenoid to
turn ON.
or
• Difference in revolution between engine
and input shaft is too small although
TCM is commanding TCC solenoid to
turn OFF.
2 driving
cycles
Not
applicable
) P0743
25
Torque converter clutch
system electrical Voltage of TCC solenoid terminal is high
although TCM is commanding TCC
solenoid to turn OFF.
1 driving
cycle
*3
1 driving
cycle
26
Voltage of TCC solenoid terminal is low
although TCM is commanding TCC
solenoid to turn ON.
) P0748
41
Pressure control solenoid
electrical No electric flow is detected on solenoid
circuit.
1 driving
cycle
1 driving
cycle
42
Too much electric flow is detected on
pressure control solenoid circuit.
) *1
P0751
*1
17
Shift solenoid-A / No.1
performance or stuck off • Actual gear position is 2nd gear
although TCM command is for 3rd gear.
or
• Actual gear position is 3rd gear although
TCM command is for 2nd gear.
2 driving
cycles
Not
applicable
) P0753
21
Shift solenoid-A / No.1
electrical Voltage of shift solenoid terminal is high
although TCM is commanding shift
solenoid to turn OFF.
1 driving
cycle
1 driving
cycle
22
Voltage of shift solenoid terminal is low
although TCM is commanding shift
solenoid to turn ON.
) *1
P0756
*1
28
Shift solenoid-B / No.2
performance or stuck off • Actual gear position is 4th gear although
TCM command is for 3rd gear.
or
• Actual gear position is 3rd gear although
TCM command is for 4th gear.
2 driving
cycles
Not
applicable