Suzuki Liana RH413, Service Manual

Page: 363 / 1302

Front Suspension: 2B-21
Specifications
Tightening Torque Specifications
S3RH0A2207001
NOTE
The specified tightening torque is also described in the following.
“Front Suspension Construction”
“Front Stabilizer Bar and/or Bushings Components”
“Front Strut Assembly Components”
“Front Wheel Hub and Steering Knuckle Components”
“Front Suspension Frame Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Tie-rod end lock nut 45 4.5 32.5
)
Stabilizer bar mounting bracket bolt 23 2.3 17.0
)
/
)
Stabilizer joint nut 50 5.0 36.5
)
/
)
Strut bracket nut (For 8.8 strength bolt) 105 10.5 76.0
)
/
)
Strut bracket nut (For 12.9 strength bolt) 90 9.0 65.0
)
/
)
Strut support nut 28 2.8 20.5
)
Brake hose mounting bolt 25 2.5 18.0 )
Wheel nut 85 8.5 61.5 ) / ) / )
Strut nut 70 7.0 50.5 )
Suspension arm ball joint nut 60 6.0 43.5 ) / ) / )
ABS wheel speed sensor mounting bolt 23 2.3 17.0 )
Tie-rod end castle nut 45 4.5 32.5 )
Caliper carrier bolt 85 8.5 61.5 )
Drive shaft nut 175 17.5 127.0 )
Control arm mounting bolt 90 9.0 65.0 ) / )
Suspension frame mounting bolt 90 9.0 65.0 )
Mounting member nut 55 5.5 40.0 )
Engine rear mounting nut 45 4.5 33.0 )