Suzuki Liana RH413, Service Manual

Page: 789 / 1302

Steering Wheel and Column: 6B-10
Steering Column Assembly Inspection
S3RH0A6206006
NOTE
Vehicles involved in accidents resulting in
body damage, where steering column has
been impacted (or air bag deployed), may
have a damaged or misaligned steering
column. For checking procedure of steering
column assembly, refer to “Checking
Steering Column Assembly for Accident
Damage”.
Steering Lock Assembly (Ignition Switch)
Removal and Installation
S3RH0A6206007
Removal
1) Remove steering column (1). Refer to “Steering
Column Assembly Removal and Installation”.
2) Using center punch (1), loosen and remove steering
lock mounting bolts (2).
NOTE
Use care not to damage aluminum part of
steering lock body with center punch.
3) Turn ignition key to “ACC” or “ON” position and
remove steering lock assembly from steering
column.
Installation
1) Position oblong hole (1) of steering shaft (2) in the
center of hole (3) in column (4).
2) Turn ignition key to “ACC” or “ON” position and
install steering lock assembly (5) onto column (4).
3) Now turn ignition key to “LOCK” position and pull it
out.
4) Align hub on lock with oblong hole (1) of steering
shaft (2) and rotate shaft to assure that steering shaft
is locked.
5) Tighten new bolts (1) until head of each bolt is
broken off.
6) Turn ignition key to “ACC” or “ON” position and
check to be sure that steering shaft (2) rotates
smoothly. Also check for lock operation.
7) Install steering column. Refer to “Steering Column
Assembly Removal and Installation”.
1
I2RH01620035-01
I2RH01620036-01
I2RH01620037-01
I2RH01620038-01