Suzuki Liana RH413, Service Manual

Page: 746 / 1302

5B-37 Manual Transmission/Transaxle:
“A”: Thread lock cement 99000–32110
Tightening torque
Final gear bolt (for 2WD) (a): 90 N·m (9.0 kgf-m,
65.0 lb-ft)
Final gear bolt (for 4WD) (a): 73 N·m (7.3 kgf-m,
53.0 lb-ft)
Transfer Components
S3RH0A5206026
I2RH01520077-01
I3RH0A520029-01
1
.
Transfer output case
: Apply sealant 99000-31260 to mating
surface of output case and rear case. 9. Drive gear 17. Differential case
2. Transfer output flange 10. Pinion bearing 18. Final gear
3. Transfer output flange oil seal
: Apply grease 99000-25010 to oil seal lip.
11. Pinion spacer 19. Final gear bolt (for 4WD)
: Apply thread lock 99000-32110 to all
around thread part of bolt.
4. Output No.2 bearing 12. Pinion bearing shim No.1 20. Transfer output case bolt
5. Output No.1 bearing 13. Pinion bearing shim No.2 : Tightening torque
6. Output shaft 14. Bevel gear set : Do not reuse.
7. Output No.3 bearing 15. Bevel pinion nut
: After tightening nut to specified torque,
caulk nut securely.
: Apply transaxle oil.
8. Drive gear bearing 16. Transfer output flange nut
: After tightening nut to specified torque,
caulk nut securely.