Suzuki Liana RH413, Service Manual

Page: 772 / 1302

5C-11 Clutch:
1) Install flywheel (2) to crankshaft and tighten bolts (1)
to specification.
Special tool
(A): 09924–17811
Tightening torque
Flywheel bolt (a): 70 N·m (7.0 kgf-m, 51.0 lb-ft)
2) Using special tool, install input shaft bearing to
flywheel (1).
Special tool
(A): 09913–76010
3) Align clutch disc with flywheel center by using
special tool, and install clutch cover (1) and bolts (2).
Then tighten bolts (2) to specification.
NOTE
• While tightening clutch cover bolts,
compress clutch disc with special tool
(clutch center guide) by hand so that disc
is centered.
• Tighten cover bolts little by little evenly in
diagonal order.
Special tool
(A): 09924–17811
(B): 09923–36320
Tightening torque
Clutch cover bolt (a): 23 N·m (2.3 kgf-m, 17.0 lb-
ft)
4) Slightly apply grease to input shaft (1), then join
transaxle assembly with engine referring to “Manual
Transaxle Unit Dismounting and Remounting in
Section 5B”.
“A”: Grease 99000–25210
NOTE
When inserting transaxle input shaft to clutch
disc, turn crankshaft little by little to match
the spline mesh.
I2RH01530024-01
I4RH01530004-01
I2RH01530026-01
I2RH01530027-01