Suzuki Liana RH413, Service Manual

Page: 658 / 1302

5A-110 Automatic Transmission/Transaxle:
54) Remove 2nd brake return spring subassembly (1).
55) Remove 2nd brake separator plates (1) discs (2) and
retaining plate (3).
56) Remove brake drum gasket (1).
57) Remove one-way clutch outer race retainer (1).
58) Check one-way clutch No.2 as follows.
• Ensure planetary carrier (1) rotates only in
counterclockwise direction “A”, never in clockwise
direction “B”.
• If the planetary carrier rotates both ways or does
not rotate either way, one-way clutch No.2
assembly will need to be replaced with new one-
way clutch No.2 assembly.
59) Remove one-way clutch No.2 assembly (1).
60) Remove planetary gear assembly (1).
61) Measure 1st and reverse brake piston stroke.
• Using special tool, measure 1st and reserve brake
piston stroke when compressed air (400 – 800
kPa, 4 – 8 kg/cm
2
, 57 – 113 psi) is blown through
oil hole.
If piston stroke exceeds specified value,
disassemble, inspect and replace discs and plates.
I2RH0B510126-01
I2RH0B510127-01
I2RH0B510128-01
I2RH0B510129-01
I2RH0B510130-01
I2RH0B510131-01
I2RH0B510132-01