background image

GM ONSTAR CLASS II DATA BUS INTERFACE

©Copyright 2004 Metra Electronics Corporation

1-800-221-0932

www.metraonline.com

GMOS-05

INSTALLATION INSTRUCTIONS

The GMOS-05 is designed to be used in Onstar equipped vehicles
with the “Dock and Lock” style harness, the radio harness that
stays mounted in the dash when the radio is removed. The radio
itself is held in by two spring loaded clips, one on each side.
Besides retaining Onstar, the GMOS-05 retains the warning chimes
that will be lost when the factory radio is removed. The GMOS-05
will also provide a 12 volt switched accessory wire for proper radio
operation.

*Note:

This interface will also work in vehicles listed below that are

not equipped with Onstar

©Copyright 2004 Metra Electronics Corporation

1-800-221-0932

www.metraonline.com

1

* IMPORTANT WARNING

THIS PRODUCT INCLUDES INSTRUCTIONS FOR INSTALLATION WHICH
MUST BE CAREFULLY FOLLOWED. THE INSTRUCTIONS ARE WORDED 
IN SUCH A MANNER TO ASSUME THAT THE INSTALLER IS CAPABLE 
OF COMPLETING THESE TYPE OF ELECTRONIC INSTALLATIONS. IF YOU 
ARE UNCLEAR AS TO WHAT YOU ARE INSTRUCTED TO DO OR BELIEVE
THAT YOU DO NOT UNDERSTAND THE INSTRUCTIONS SO AS TO 
PROPERLY AND SAFELY COMPLETE THE INSTALLATION YOU SHOULD
CONSULT A TECHNICIAN WHO DOES HAVE THIS KNOWLEDGE AND
UNDERSTANDING.

FAILURE TO FOLLOW THESE INSTRUCTIONS 

CAREFULLY AND TO INSTALL THE INTERFACE AS DESCRIBED COULD
CAUSE HARM TO THE VEHICLE OR TO SAFETY SYSTEMS ON THE
VEHICLE. INTERFERENCE WITH CERTAIN SAFETY SYSTEMS COULD
CAUSE HARM TO PERSONS AS WELL. IF YOU HAVE ANY QUESTIONS
IN THIS REGARD PLEASE CALL THE HELP LINE OR THE METRA AT
1-800-221-0932 FOR ASSISTANCE.

INST-GMOS05

INST-GMOS05

* READ IMPORTANT WARNING ON PAGE 1

BEFORE ATTEMPTING ANY INSTALLATION

INTERFACE COMPONENTS

• GMOS-05

• 10 pin harness with stripped leads

• 12 pin harness to 32 pin GM harness with 

stripped leads

APPLICATIONS

• Buick Le Sabre 2000-2005

• Oldsmobile Aurora 2001-2003

• Pontiac Bonneville 2000-2005

**N

N

o

o

t

t

e

e

 :

:

  This interface will NOT

work to retain factory amplifiers.

  

 

 

 

 

 

 

 

 

Reviews: