background image

Troubleshooting
Specifications
Disposal Instructions

18

Cleaning Instructions

17

Daily Inspection Instructions

18

19

20

Daily Inspection Checklist

21

9

10
11
11

12
13
14

15
16
16

Warning and Caution for Safety

Warning Label Locations

Precautions for Use

Preparation

Operating Instructions

Part Names

2

6

5

7

8

Power supply

Reclining Chair for Beauty Salon Use

AE-A81A  

Model No.

Operation Manual

Contents

1E00J5BE (BOOK No.)

2023-09 (2nd edition)

Operating the foot control

Operating the multi-functional headrest

Before letting a customer sit in the chair

When moving the seat up or down 

with a customer sitting in the chair

Shockless motion

Bringing the chair parts to their 

predetermined positions with a customer 

sitting in the chair

Using the height-adjustable service tables

Using the heaters

Using the built-in sockets

If this operation manual is lost or becomes unreadable due to tearing or smears, 
please ask us to send a new one.

Thank you very much for purchasing a Takara Belmont 
product.

Be sure to read through this operation 
manual carefully before use, and 
operate the product correctly.

This motorised reclining chair is for beauty salon use 
only. Do not use it for any other purposes.
After reading through this manual, keep it safe within 
reach of the chair operator and refer to it whenever 
necessary.

When having a customer lie flat

Summary of Contents for ESTHE PLACE

























Reviews: