Suzuki Liana RH413, Service Manual

Page: 1189 / 1302

Wipers / Washers: 9D-6
Washer Linked Circuit
1) Make sure that front wiper switch is at “OFF”
position.
2) Connect battery positive (+) terminal to terminal “B3”
and its negative (–) terminal to terminal “EW”.
3) Connect voltmeter positive lead to terminal “L” and
its negative lead to terminal “EW”.
4) When front washer switch is ON, check that voltage
changes as shown in figure.
If check result is not satisfied, replace switch.
Rear Wiper and Washer Switch Removal and
Installation
S3RH0A9406008
Refer to “Windshield Wiper and Washer Switch Removal
and Installation”.
[A]: For vehicle without INT time control switch
[B]: For vehicle with INT time control switch
Voltage
High
Low
3.8 ± 1 sec.
[A]
[B]
INT
TIME
INT
TIME
INT time control
switch position
Voltage
High
Low
1.6 ± 1 sec.
High
Low
10.7 ± 5 sec.
I3RH0A940012-01
[A]: LH steering vehicle
[B]: RH steering vehicle
I3RH0A940004-01