Suzuki Liana RH413, Service Manual

Page: 39 / 1302

Maintenance and Lubrication: 0B-7
Fuel Tank Inspection
S3RH0A0206037
Check fuel tank damage, cracks, fuel leakage, corrosion
and tank bolts looseness.
If a problem is found, repair or replace.
PCV Valve Inspection
S3RH0A0206038
Check crankcase ventilation hose and PCV hose for
leaks, cracks or clog, and PCV valve for stick or clog.
Refer to “PCV Valve Inspection in Section 1B” for PCV
valve checking procedure.
Fuel Evaporative Emission Control System
Inspection
S3RH0A0206012
1) Visually inspect hoses for cracks, damage, or
excessive bends. Inspect all clamps for damage and
proper position.
2) Check EVAP canister for operation and clog,
referring to “EVAP Canister Inspection in Section
1B”.
If malfunction is found, repair or replace.
Brake Discs and Pads (Front) Inspection
S3RH0A0206013
Check front disc brake pads and discs for excessive
wear, damage and deflection. For details, refer to “Front
Disc Brake Pad Inspection in Section 4B”. Replace parts
as necessary.
Be sure to torque caliper pin bolts to specification.
Brake Drums and Shoes (Rear) Inspection
S3RH0A0206014
Check rear brake drums and brake linings for excessive
wear and damage, while wheels and drums are
removed. For details, refer to “Rear Brake Drum
Inspection in Section 4C”. At the same time, check
wheel cylinders for leaks. Replace these parts as
necessary.
Brake Hoses and Pipes Inspection
S3RH0A0206015
Perform this inspection where these is enough light and
use a mirror as necessary.
• Check brake hoses and pipes for proper hookup,
leaks, cracks, chafing and other damage.
• Check that hoses and pipes are clear of sharp edges
and moving parts.
Repair or replace any of these parts as necessary.
CAUTION
!
After replacing any brake pipe or hose, be
sure to carry out air purge operation.
Brake Fluid Replacement
S3RH0A0206017
Change brake fluid as follows.
Drain existing fluid from brake system completely, fill
system with specified fluid and carry out air purge
operation.
For air purging procedure, refer to “Air Bleeding of Brake
System in Section 4A”.
I2RH0B020008-01
I2RH01020014-01
I2RH01020015-01
I2RH01020016-01