Suzuki Liana RH413, Service Manual

Page: 703 / 1302

Automatic Transmission/Transaxle: 5A-155
81) Install new gaskets (2) and then install fluid cooler
pipes.
Tightening torque
Fluid cooler pipe union bolt (b): 22 N·m (2.2 kgf-
m, 16.0 lb-ft)
Fluid cooler pipe bracket bolt (c): 10 N·m (1.0
kgf-m, 7.5 lb-ft)
82) After applying A/T fluid to new O-ring, fit it to fluid
filler tube. Then install fluid filler tube to transaxle
case.
Tightening torque
Fluid filler tube bolt (d): 10 N·m (1.0 kgf-m, 7.5
lb-ft)
83) Install select cable bracket (1).
Tightening torque
Select cable bracket bolt (a): 23 N·m (2.3 kgf-m,
17.0 lb-ft)
84) Apply A/T fluid to O-rings of each sensor and install
input shaft speed sensor (1) and output shaft speed
sensor / VSS (2).
Tightening torque
Input shaft speed sensor bolt (a): 5.5 N·m (0.55
kgf-m, 4.0 lb-ft)
Output shaft speed sensor / VSS bolt (b): 13
N·m (1.3 kgf-m, 9.5 lb-ft)
85) Install select cable clamp (3).
Tightening torque
Select cable clamp bolt (c): 23 N·m (2.3 kgf-m,
17.0 lb-ft)
86) Install transmission range sensor to transaxle case,
tighten bolts (1) temporarily at this step.
87) Install lock washer (1) and tighten lock nut (2) to
specified torque.
Tightening torque
Transmission range sensor lock nut (a): 7 N·m (
0.7 kgf-m, 5.0 lb-ft)
(d)
(c)
(b)
2
1, (a)
I2RH0B510328-01
1
(a)
I2RH0B510329-01
(a)
1
3
(c)
2
(b)
I2RH0B510330-01
1
I2RH0B510331-01
1
2, (a)
I2RH0B510332-01