Suzuki Liana RH413, Service Manual

Page: 361 / 1302

Front Suspension: 2B-19
Front Suspension Frame Removal and
Installation
S3RH0A2206019
Removal
1) Hoist vehicle and remove wheels (right & left).
2) Remove stabilizer bar. Refer to “Front Stabilizer Bar
and/or Bushings Removal and Installation”.
3) Remove suspension arms (right & left). Refer to
“Suspension Control Arm / Bushing Removal and
Installation”.
4) Remove engine rear mounting nuts and engine
mounting member bolts (2WD vehicle).
NOTE
• For 2WD vehicle, be careful not to loose
cushions (5) and spacers (4) which may
stick to suspension frame (1).
• For 4WD vehicle, support transmission to
prevent joint parts from being applied
excessive force at removal of suspension
frame (1).
5) Remove suspension frame from body.
Installation
1) Install suspension frame (1) to body, and tighten bolt
to specified torque.
Tightening torque
Suspension frame mounting bolt (a): 90 N·m (
9.0 kgf-m, 65.0 lb-ft)
2) Install mounting member (2), spacers and cushions
to suspension frame (1) if removed and tighten bolts
and nuts to specified torque.
Tightening torque
Mounting member nut (b): 55 N·m (5.5 kgf-m,
40.0 lb-ft)
Engine rear mounting nut (g): 45 N·m (4.5 kgf-
m, 33.0 lb-ft)
[B]: For 2WD vehicle 2. Engine rear mounting
3. Mounting member
I4RH01220019-01
I2RH01220058-01
[A]: 2WD vehicle 3. Rear engine mounting
[B]: 4WD vehicle
(a)
1
I2RH01220059-01
I3RH0A220008-01