Suzuki Liana RH413, Service Manual

Page: 611 / 1302

Automatic Transmission/Transaxle: 5A-63
3 Check shift solenoid valve resistance
1) Turn ignition switch OFF.
2) Disconnect valve body harness connector (1, 2) on
transaxle.
3) Check for proper connection to solenoid valve (3) or (4)
at “GRY” or “GRN/ORN” circuit.
4) Check resistance of solenoid valves.
Shift solenoid valve resistance
Between terminal of transaxle side valve body
harness connector and transaxle: 11 – 15
Ω
at 20
°
C
(68
°
F)
Is check result satisfactory?
Go to Step 4. Replace shift solenoid
valve or lead wire.
4 Check shift solenoid circuit for ground short or open
1) Connect valve body harness connector.
2) Measure resistance between terminal “G08-4” or “G08-
3” of disconnected harness side TCM connector and
ground.
Is it 11 – 15
Ω
at 20
°
C (68
°
F)?
Intermittent trouble or
faulty TCM.
Check for intermittent
referring to “Intermittent
and Poor Connection
Inspection in Section
00”.
If OK, substitute a
known-good TCM and
recheck. “GRY” or “GRN/ORN”
circuit shorted to ground
or open.
Step Action Yes No
1
6 7
8 9
10
5 4 3 2
1
2
3
4
I2RH0B510027-01