Brake Control System and Diagnosis: 4A-23
LSPV (Load Sensing Proportioning Valve) Assembly (If Equipped)
S3RH0A4106019
CAUTION
!
Never disassemble LSPV assembly. Disassembly will spoil its original performance. Replace with new
one if detective.
LSPV (Load Sensing Proportioning Valve)
Removal and Installation
S3RH0A4106020
Removal
1) Clean around reservoir cap and take out fluid with
syringe or such.
2) Hoist vehicle.
3) Disconnect brake pipes from LSPV assembly.
4) Remove mounting bolts (3) and adjusting nut (2).
5) Remove LSPV assembly (1) with spring (4) from
vehicle body.
Installation
1) Install LSPV assembly with spring to vehicle body.
2) Apply multi-purpose grease to upper and lower joint
(1) of coil spring.
I3RH0A410016-01
1. LSPV assembly
3. Adjust nut
5. LSPV mounting bolt
2. Spring
4. Brake pipe
: Tightening torque
I3RH0A410017-01
I3RH0A410018-01
I3RH0A410019-01
Summary of Contents for Liana RH413
