Suzuki Liana RH413, Service Manual

Page: 1205 / 1302

Glass / Windows / Mirrors: 9E-14
Rearend Door Window (for Wagon Model) Components
S3RH0A9506012
Rearend Door Glass (for Wagon Model) Removal and Installation
S3RH0A9506013
Refer to “Windshield Removal and Installation” as removal and installation procedures are basically the same.
However, note the following.
• Observe the following precautions when applying adhesive (1) along glass (2) edge.
• Adhesive (1) should be applied evenly especially in height.
• Be careful not to damage primer (3).
• With the position of fastener (4) properly aligned, install glass (2) on rearend door panel (5).
• Press glass against body quickly after adhesive (1) is applied.
Adhesive amount specifications and position for rearend door glass
Height “a”: 14 mm (0.55 in.)
Width “b”: 7 mm (0.28 in.)
Width “c”: 16 mm (0.63 in.)
Position “d”: 14 mm (0.55 in.) for glass upper and side sections
Position “d”: 15 mm (0.59 in.) for glass bottom section
I2RH01950054-01
1. Rearend door panel 2. Rearend door glass 3. Spacer 4. Fastener 5. Rearend door glass trim
I4RH01950013-01