Suzuki Liana RH413, Service Manual

Page: 745 / 1302

Manual Transmission/Transaxle: 5B-36
3) Drive in spring pin from right side till it is flush with
differential case surface (for 2WD).
4) Press-fit left bearing (1) by using special tool and
copper hammer.
Special tool
(A): 09951–76010
5) Press-fit new sensor rotor (1), putting groove (2) side
upward and using special tools and copper hammer.
Special tool
(A): 09913–75510
(B): 09944–78210
6) Press-fit right bearing (1) by using special tools and
copper hammer.
Special tool
(A): 09924–74510
(B): 09951–16060
(C): 09913–85230
7) Hold differential assembly with soft jawed vise (3),
install final gear (2) (and bevel gear for 4WD) and
then tighten final gear bolts (1) to which thread lock
cement has been applied.
Apply thread lock cement to bolt thread when
reusing bolts.
CAUTION
!
Use of any other bolts than specified ones is
prohibited.
[A]: Left side
[B]: Right side
2. Differential case
I3RH0A520083-01
I2RH01520074-01
2. Differential case
3. Differential side left bearing
I3RH0A520027-01
I3RH0A520028-01