Suzuki Liana RH413, Service Manual

Page: 668 / 1302

5A-120 Automatic Transmission/Transaxle:
Forward and Reverse Clutch Assembly Components
S3RH0A5106034
Forward and Reverse Clutch Assembly
Preliminary Check
S3RH0A5106035
1) Install forward and reverse clutch assembly (1) to
transaxle rear cover (2), blow in compressed air (400
– 800 kPa, 4 – 8 kg/cm
2 , 57 – 113 psi) through oil
hole of transaxle rear cover with the special tool
attached on the upper surface of reverse clutch
retaining plate (3), and measure reverse clutch
piston stroke.
If piston stroke exceeds specified value,
disassemble, inspect and replace inner parts.
Special tool
(A): 09900–20607
(B): 09900–20701
Reverse clutch piston stroke
1.2 – 1.6 mm (0.047 – 0.063 in.)
I3RH0A510029-01
1. Forward clutch balancer 8. Inter mediate shaft seal ring 15. Forward clutch disc
2. Forward clutch return spring
subassembly
9. Reverse clutch plate snap ring 16. Forward clutch separator plate
3. Forward clutch piston 10. Reverse clutch retaining plate 17. Balancer snap ring
4. Forward clutch piston O-ring 11. Reverse clutch separator plate 18. Cushion plate
5. Forward clutch drum 12. Reverse clutch disc : Apply automatic transaxle fluid.
6. Forward clutch drum O-ring 13. Forward clutch plate snap ring : Do not reuse.
7. Intermediate shaft subassembly 14. Forward clutch retaining plate