Suzuki Liana RH413, Service Manual

Page: 35 / 1302

Maintenance and Lubrication: 0B-3
NOTE
• “I”: Inspect and correct or replace if necessary
• “R”: Replace or change
• *1: Inspect more frequently if the vehicle is used under dusty conditions.
Repair Instructions
Drive Belt Inspection
S3RH0A0206001
WARNING
!
Be sure to disconnect negative cable from
battery before checking, adjusting and
replacing belt.
Water Pump and Generator Drive Belt
Inspect belt (1) for cracks, cuts, deformation, wear,
cleanliness and tension referring to “Water Pump /
Generator Drive Belt Tension Inspection and Adjustment
in Section 1F”.
If any faulty condition is found, adjust or replace.
A/C Compressor and/or Power Steering Pump Drive
Belt
Inspect belt for cracks, cuts, deformation, wear,
cleanliness and tension referring to “P/S Pump Drive
Belt On-Vehicle Inspection in Section 6C”.
If any faulty condition is found, adjust or replace.
– B – – E – – H
Manual transaxle oil, transfer oil (4WD
A/T) and differential oil (4WD)
) , ) R
First time only:
15,000 km (9,000 miles) or 12 months
Second time and after:
Every 30,000 km (18,000 miles) or 24
months reckoning from 0 km (0 mile)
or 0 month
– B – – E – – H Automatic transaxle fluid ) R
Every 30,000 km
(18,000 miles) or 24 months
Severe
Condition Code
Maintenance
Maintenance
Operation
Maintenance Interval
I2RH0B020001-01
[A]: Vehicle with power steering
[B]: Vehicle with power steering and air conditioning
I2RH0B020002-01