Suzuki Liana RH413, Service Manual

Page: 1013 / 1302

Air Bag System: 8B-88
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear diagnostic trouble codes (Refer to “DTC Clearance”), if any.
• Repeat “Air Bag Diagnostic System Check” to confirm that the trouble has been corrected.
3 1) With ignition switch OFF, disconnect Special Tool (B)
and (C) then reconnect contact connector “L73” or “L74”.
2) Disconnect side air bag (inflator) module connector (1)
from side air bag (inflator) module.
3) Check proper connection to side air bag (inflator)
module at terminal in connector.
4) If OK, then connect Special Tool (A), (B) and (C) to
connector.
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
With ignition switch ON, does DTC B1082 or B1086 still
exist?
DTC: B1082
Repair short from
“WHT/RED” wire circuit
to “WHT/GRN” wire
circuit in seat harness or
from “WHT/RED” or
“WHT/GRN” wire circuit
to other wire circuit.
DTC: B1086
Repair short from “RED/
BLK” wire circuit to
“RED/YEL” wire circuit
in seat harness or from
“RED/BLK” or “RED/
YEL” wire circuit to
other wire circuit. Replace side air bag
(inflator) module
referring to “Side Air
Bag (Inflator) Module
Removal and
Installation”.
Step Action Yes No
1
(A)
(B)
(C)
STEERING WHEEL
“L75”, “L76”
I3RH0A820089-01