Suzuki Liana RH413, Service Manual

Page: 986 / 1302

8B-61 Air Bag System:
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear diagnostic trouble codes (Refer to “DTC Clearance”), if any.
• Repeat “Air Bag Diagnostic System Check” to confirm that the trouble has been corrected.
2 1) With ignition switch OFF, disconnect SDM connector
“L70”.
2) Check proper connection to SDM at “L70-33” and “L70-
34” or “L70-36” and “L70-35” terminals.
3) If OK, then measure resistance with connected Special
Tool (B).
Special tool
(A): 09932-76010
(B): 09932-75010
(C): 09932-78310
a) DTC B1042: between “L70-33” and “L70-34”
terminals.
b) DTC B1046: between “L70-36” and “L70-35”
terminals.
Is resistance 1.8
Ω
or more?
Substitute a known-
good SDM and recheck. DTC B1042:
Repair short from “PNK”
wire circuit to “WHT”
wire circuit, or from
“PNK” or “WHT” wire
circuit to other wire
circuit.
DTC B1046:
Repair short from “BRN”
wire circuit to “LT GRN”
wire circuit, or from
“BRN” or “LT GRN” wire
circuit to other wire
circuit.
Step Action Yes No
“L75”, “L76”
(A)
(B)
(C)
STEERING WHEEL
I3RH0A820029-01
“L70-34” “L70-33”
(A)
(A)
I2RH01820036-01
“L70-35” “L70-36”
(A)
(A)
I2RH01820037-01