Suzuki Liana RH413, Service Manual

Page: 1240 / 1302

9J-1 Hood / Fenders / Doors:
Body, Cab and Accessories
Hood / Fenders / Doors
Repair Instructions
Hood Removal and Installation
S3RH0A9A06001
Removal
CAUTION
!
Place cloth to prevent body from any
damage.
1) Remove hood silencer (1).
2) Remove window washer hose (2) from hood (3).
3) Remove 2 mounting bolts (4) to detach hood (3).
Installation
Reverse removal procedure noting the following.
• Apply sealant to contact face “A” of hood hinge.
Specified sealant.
“A”: Sealant 99000–31110
• Tighten hood hinge mounting bolts.
Hood Inspection and Adjustment
S3RH0A9A06002
Inspection
• Check that hood opens and closes smoothly and
properly. Lubricate if necessary.
• Check that hood stops in the secondary latched
position properly (preventing hood from opening
freely) and that hood closes completely in the fully
latched position.
• Adjust hood locks position, if necessary.
Adjustment
Adjust the following point:
• Hood position adjustment.
Fore-and-aft and right-and-left adjustment.
Adjust hood clearance by loosening hood mounting
bolts.
• Vertical adjustment
If only one side (right or left) of hood is not level with
front fender, make it level by tightening or loosening
hood cushion (1).
• Hood lock position adjustment
When installing hood lock (1), bring bolt at highest
position and move it in vertical direction for
adjustment free from loose to hood striker.
Tightening torque
Hood latch bolts (a): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
2
3
1
“A”
“A”
4
I3RH0A9A0002-01
I2RH019A0022-01
(a)
(a)
1
I2RH019A0023-01