Suzuki Liana RH413, Service Manual

Page: 630 / 1302

5A-82 Automatic Transmission/Transaxle:
Select Cable Components
S3RH0A5106006
Select Cable Removal and Installation
S3RH0A5106003
Removal
1) Remove parking brake lever cover.
2) Remove console box.
3) Disconnect select cable from selector lever and then
detach from bracket.
4) Remove clip and disconnect select cable from
manual shift.
5) Remove select cable retainer from dash panel.
Installation
Install select cable by reversing removal procedure.
The important steps in installation are as follows.
• Apply grease to pin and cable joint.
• Tighten bolts to specified torque.
• Adjusting procedure is as follows. Refer to “Selector
Cable Adjustment”.
Selector Cable Adjustment
S3RH0A5106007
1) Shift manual shift lever to transmission range sensor
“N” range.
2) Remove adjuster (cable end) from selector lever pin
of selector lever assembly.
I3RH0A510036-01
1. Selector lever assembly 6. Clip
2. Select cable 7. Select cable retainer bolt
3. Select cable retainer 8. Manual shift lever pin
: Apply lithium grease 99000-25010 to all around pin (0.15 g)
4. Cable bracket 9. Selector lever pin
: Apply lithium grease 99000-25010 to all around pin (0.15 g)
5. Manual shift lever : Tightening torque
“P”
“R”
“N” “D”
“2”
“L”
I2RH0B510040-01