Suzuki Liana RH413, Service Manual

Page: 269 / 1302

Engine Lubrication System: 1E-6
Oil Pump Removal and Installation
S3RH0A1506005
Refer to “Timing Chain Cover Removal and Installation
in Section 1D”.
Oil Pump Disassembly and Assembly
S3RH0A1506006
Disassembly
1) Remove rotor plate (1) by removing its mounting
bolts.
2) Remove outer rotor (1) and inner rotor (2).
3) Remove relief valve (1), spring (2) and retainer (3) by
removing circlip (4).
Assembly
1) Wash, clean and then dry all disassembled parts.
2) Apply thin coat of engine oil to inner and outer rotors,
oil seal lip portion and inside surfaces of oil pump
case.
3) Install outer (1) and inner rotors (2) to oil pump case.
4) Install relief valve component (1) to rotor plate (2).
5) Install rotor plate and tighten all bolts to specified
torque. After installing plate, check to be sure that
rotors turn smoothly by hand (0.3 N
⋅
m (0.03 kgf-m,
0.25 lb-ft) torque or below).
Tightening torque
Oil pump rotor plate bolt (a): 11 N·m (1.1 kgf-m,
8.0 lb-ft)
I2RH0B150018-01
I2RH0B150019-01
I2RH0B150020-01
I2RH0B150019-01
I2RH0B150021-01
I3RH0A150004-01