Suzuki Liana RH413, Service Manual

Page: 334 / 1302

1K-2 Exhaust System:
Exhaust Manifold Components
S3RH0A1B06002
Exhaust Manifold Removal and Installation
S3RH0A1B06003
Removal
WARNING
!
To avoid danger of being burned, do not
service exhaust system while it is still hot.
Service should be performed after system
cools down.
1) Disconnect negative cable at battery.
2) Disconnect heated oxygen sensor coupler (1) (if
equipped) and detach it from its stay.
3) Remove exhaust manifold cover (2).
4) Remove exhaust manifold stiffener (1).
5) Remove exhaust No.1 pipe (2) from exhaust
manifold.
6) Remove exhaust manifold (1) and its gasket from
cylinder head.
Installation
1) Install new gasket to cylinder head. Then install
exhaust manifold.
Tighten manifold bolts and nuts to specified torque.
I3RH0A1B0002-01
1-1. Exhaust manifold (with oxygen sensor) 4-2. Exhaust manifold cover (without oxygen sensor) 9. Exhaust manifold stiffener bolt
1-2. Exhaust manifold (without oxygen sensor) 5. Engine hook 10. Exhaust pipe bolt
2. Exhaust manifold gasket 6. Exhaust manifold stiffener 11. Exhaust manifold mounting bolt
3. Heated oxygen sensor (if equipped) 7. Gasket : Tightening torque
4-1. Exhaust manifold cover (with oxygen sensor) 8. Exhaust manifold mounting nut : Do not reuse.
2
1
I2RH0B1B0003-01
2
1
I2RH0B1B0004-01
1
I2RH0B1B0005-01