Suzuki Liana RH413, Service Manual

Page: 42 / 1302

0B-10 Maintenance and Lubrication:
Drive Shaft (Axle) Boots Inspection
S3RH0A0206026
Check drive shaft boots (wheel side and differential side)
for leaks, detachment, tear or other damage.
Replace defective parts as necessary.
Propeller Shafts (4WD) Inspection
S3RH0A0206039
1) Check propeller shaft connecting bolts for
looseness. If looseness is found, tighten to specified
torque.
2) Check propeller shaft joints for wear, play and
damage. If any defect is found, replace.
3) Check propeller shaft center support for biting of
foreign matter, crack, abnormal noise and damage. If
any defect is found, replace.
Manual Transaxle Oil Inspection
S3RH0A0206027
1) Inspect transaxle case for evidence of oil leakage.
Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level
check.
3) Remove oil filler/level plug (1) of transaxle.
4) Check oil level.
Oil level can be checked roughly by means of filler/
level plug hole. That is, if oil flows out of level plug
hole or if oil level is found up to hole when level plug
is removed, oil is properly filled.
If oil is found insufficient, pour specified oil up to level
hole. For specified oil, refer to “Manual Transaxle Oil
Change in Section 5B”.
5) Install filler/level plug referring to “Manual Transaxle
Oil Change in Section 5B”.
Manual Transaxle Oil Replacement
S3RH0A0206028
Change transaxle oil referring to “Manual Transaxle Oil
Change in Section 5B”.
I4RH01020002-01
I2RH0B020009-01
[A]: 2WD
[B]: 4WD
I2RH0B020011-01