Suzuki Liana RH413, Service Manual

Page: 404 / 1302

3A-5 Drive Shaft / Axle: Front
2) Wipe off grease from shaft and take off snap ring (1)
by using special tool.
Special tool
(A): 09900-06107
3) Remove spider (1) by using 3 arms puller (2).
CAUTION
!
To prevent any problem caused by washing
solution, do not wash tripod joint except its
housing. Degreasing of tripod joint with cloth
is allowed.
4) Remove differential side boot small band, and then
pull out differential side boot from shaft.
5) Pull out damper through shaft, if equipped.
6) Undo boot bands of wheel side joint boot, then pull
out boot through shaft.
CAUTION
!
• Disassembly of wheel side joint is not
allowed. If any noise or damage exists in it,
replace it as assembly.
• Do not disassemble tripod joint spider. If
any malcondition is found in it, replace it
as differential side joint assembly.
For DOJ type
1) Remove differential side boot big band (1).
2) Slide boot (1) toward the center of shaft and remove
snap ring (2) from outer race, and then take shaft out
of outer race (3).
3) Wipe off grease and remove circlip (1) used to fix
cage (2) by using special tool.
Special tool
(A): 09900-06107
I3RH0A311009-01
I3RH0A311004-01
I2RH01310011-01
I2RH01310012-01
I4RH01311003-01