9J-3 Hood / Fenders / Doors:
Front Door Assembly Components
S3RH0A9A06005
Front Door Assembly Removal and Installation
S3RH0A9A06006
Removal
1) Remove front fender referring to “Front Fender
2) Disconnect door harness lead wires at each coupler.
3) Remove front door opening weather-strip.
4) Remove door open stopper (1).
5) Support door panel (1) using a jack (2) with rags (3)
and a piece of wood (4) placed between jack (2) and
panel (1) as shown.
6) Remove door assembly (1) by loosening hinge
mounting bolts (2).
1
3
2
4 23 N·m (2.3 kg-m)
5 28 N·m (2.8 kg-m)
4 23 N·m (2.3 kg-m)
6
I4RH019A0002-01
1. Door panel
3. Door open stopper
5. Door open stopper bolt
: Tightening torque
2. Door hinge
: Apply lithium grease 99000-25010 to rotating part.
: Apply sealant 99000-31110 to contact face.
4. Front door hinge bolt
6. Front door opening
weather-strip
I2RH019A0002-01
I2RH019A0003-01
2
1
I2RH019A0004-01
Summary of Contents for Liana RH413
