Suzuki Liana RH413, Service Manual

Page: 499 / 1302

Rear Brakes: 4C-7
3) Install parking brake cable (3) to brake back plate
(1).
4) Install wheel hub referring to “Wheel Hub with Wheel
Bearing and Wheel Stud Removal and Installation
(2WD Model) in Section 2C” or “Wheel Hub, Wheel
Stud / Wheel Bearing Outside Inner Race Removal
and Installation (4WD Model) in Section 2C”.
5) Install wheel cylinder, and tighten wheel cylinder
bolts and brake pipe flare nut to specified torque.
Refer to “Wheel Cylinder Removal and Installation”.
6) For procedure hereafter refer to “Wheel Cylinder
Removal and Installation”.
Specifications
Tightening Torque Specifications
S3RH0A4307001
NOTE
The specified tightening torque is also described in the following.
“Rear Drum Brake Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
Special Tools and Equipment
Recommended Service Material
S3RH0A4308001
NOTE
Required service material is also described in the following.
“Rear Drum Brake Components”
2. Cable stopper ring
I2RH01430026-01
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Brake drum screw 8 0.8 6.0 )
Wheel nut 85 8.5 61.5 ) / )
Wheel cylinder mounting bolt 12 1.2 9.0 )
Rear brake pipe flare nut 16 1.6 11.5 )
Brake back plate bolt 50 5.0 36.5 )
Material SUZUKI recommended product or Specification Note
Water tight sealant SUZUKI Sealing Compound 366E P/No.: 99000–31090 )