Suzuki Liana RH413, Service Manual

Page: 222 / 1302

1D-17 Engine Mechanical:
Timing Chain Cover Components
S3RH0A1406019
Timing Chain Cover Removal and Installation
S3RH0A1406020
Removal
1) Remove engine assembly from vehicle referring to
“Engine Assembly Removal and Installation”.
2) Remove crankshaft pulley bolt.
To lock crankshaft pulley (1), use special tool with it
as shown in the figure.
Special tool
(A): 09917–68221
3) Remove crankshaft pulley (1).
If it is hard to remove, use special tools as shown in
the figure.
Special tool
(A): 09944–36011
(B): 09926–58010
I3RH0A140005-01
[A]: Sealant application amount 2. Crankshaft pulley 6. Timing chain cover mounting bolts
“a”: 3 mm (0.12 in.) 3. Oil seal
: Apply engine oil to oil seal lip.
: Tightening torque
“b”: 2 mm (0.08 in.) 4. Timing chain cover
: See “A”
: See “B”
: Do not reuse.
1. Crankshaft pulley bolt 5. Pin
“A”: Apply sealant 99000-31140 to the mating surface of cylinder and cylinder head.
“B”: Apply sealant 99000-31250 to the mating surface of timing chain cover referring to the figure of Step 1) in “Installation” of “Timing Chain Cover
Removal and Installation”.
I2RH0B140051-01