Suzuki Liana RH413, Service Manual

Page: 388 / 1302

2C-24 Rear Suspension:
Specifications
Tightening Torque Specifications
S3RH0A2307001
NOTE
The specified tightening torque is also described in the following.
“Rear Suspension Construction”
“Rear Stabilizer Bar and/or Bushings Components”
“Rear Strut Assembly Components”
“Control Rod Components”
“Rear Suspension Frame Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
Special Tools and Equipment
Recommended Service Material
S3RH0A2308001
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Control rod No.2 (rear side) inner nut 90 9.0 65.0
)
/
)
Stabilizer bar bracket bolt 23 2.3 17.0
)
Stabilizer joint nut 50 5.0 36.5
)
/
)
Strut support nut 28 2.8 20.5
)
Strut bracket nut 90 9.0 65.0
)
/
)
Strut upper nut 70 7.0 50.5
)
Control rod No.1 (front side) inner nut and outer
bolt
98 9.8 71.0
)
Control rod No.2 (rear side) outer bolt 98 9.8 71.0 )
Trailing rod bolt 98 9.8 71.0 )
Suspension frame bolt 90 9.0 65.0 )
Suspension frame mounting bolt 90 9.0 65.0 )
Wheel nut 85 8.5 61.5 ) / ) / )
Rear spindle nut 175 17.5 126.5 )
Rear drive shaft nut 175 17.5 126.5 )
Back plate bolt 50 5.0 36.0 )
Brake pipe flare nut 16 1.6 12.0 )
Control rod outer bolts and trailing rod rear bolt 98 9.8 71.0 )
Material SUZUKI recommended product or Specification Note
Grease SUZUKI Super Grease A P/No.: 99000–25010 )
Sealant SUZUKI sealing compound 366E P/No.: 99000–31090 )