Suzuki Liana RH413, Service Manual

Page: 332 / 1302

1J-10 Charging System:
Specifications
Charging System Specifications
S3RH0A1A07001
NOTE
The battery used in each vehicle is one of the following three types, depending on specification.
Battery
Generator
Tightening Torque Specifications
S3RH0A1A07002
NOTE
The specified tightening torque is also described in the following.
“Generator Dismounting and Remounting”
“Generator Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
Battery type 38B20L 55B24L 75D23L
Rated capacity AH/5HR, 12 Volts 28 38 54
Electrolyte L (US / lmp pt.) 2.1 (4.44 / 3.70) 2.8 (5.92 / 4.93) 3.9 (8.24 / 6.86)
Electrolyte S.G. 1.28 when fully charged at 20
°
C (68
°
F)
Type 75 A type
Rated voltage 12 V
Nominal output 75 A
Permissible max. speed 18,000 r/min.
No-load speed 1020 r/min. (rpm)
Regulated voltage 14.2 – 14.8 V (Hi), 12.5 – 13.1 V (Lo)
Exposed brush length Standard: 10.5 mm (0.41 in.)
Limit: 1.5 mm (0.05 in.)
Permissible ambient temperature –30 to 90
°
C (–22 to 194
°
F)
Polarity Negative ground
Rotation Clockwise viewed from pulley side
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Body ground bolt 8.0 0.8 6.0 )