Suzuki Liana RH413, Service Manual

Page: 490 / 1302

4B-6 Front Brakes:
4) Insert piston into cylinder by hand and fit boot in boot
groove in piston.
NOTE
Check that boot is fitted in boot groove
securely all around piston and cylinder.
5) [For other than NISSIN made caliper]
Install cylinder boot retaining ring (2) to cylinder boot
(1) as shown in figure.
CAUTION
!
Use care not to cause damage to cylinder
boot.
Front Disc Brake Caliper Inspection
S3RH0A4206007
Pin Boot and Cylinder Boot
Check boots for breakage, crack and damage.
If defective, replace.
Piston Seal
Excessive or uneven wear of pad lining may indicate
unsmooth return of piston.
In such case, replace rubber seal.
Front Brake Disc Removal and Installation
S3RH0A4206008
Removal
1) Hoist vehicle and remove wheel.
2) Remove caliper assembly by removing caliper
carrier bolts (2 pcs)
CAUTION
!
During removal, be careful not to damage
brake flexible hose and not to depress brake
pedal.
NOTE
Hang removed caliper with a wire hook or the
like so as to prevent brake hose from
bending and twisting excessively or being
pulled.
Don’t operate brake pedal with brake pads
removed.
I2RH01420020-01
1
2
I2RH01420021-01
I2RH01420014-01
I2RH01420015-01
I2RH01420024-01