v.link NAL-PC-HSD Manual Download Page 1

Page: 1 / 21

Version 24.04.2017

v.LiNK

Video-inserter and navigation

VL2-PC-HSD and NAL-PC-HSD

Compatible with Citroen and Peugeot vehicles

with SMEG or SMEG+ navigation

with 4pin HSD LVDS connector on the monitor

VL2-PC-HSD: Video-inserter with 2 video + RGB + rear-view camera input and

CAN control

NAL-PC-HSD: Video-inserter with integrated navi2 video + rear-view

camera input and CAN control

Product features



Video-inserter for factory-infotainment monitors



2 CVBS video-inputs for after-market devices (e.g. DVD-Player, DVB-T tuner, …)



Built-in audio-switch (no audio-insertion)



Rear-view camera CVBS video-input



Automatic switching to rear-view camera input on engagement of reverse gear



Activatable parking guide lines for rear-view camera (not for all vehicles)



RGB-input for after-market navigation (VL2 only)



Video-in-motion (ONLY for connected video-sources)



Compatible with factory rear-view camera



AV-inputs PAL/NTSC compatible

Summary of Contents for NAL-PC-HSD






















Search results

Summary of Contents for NAL-PC-HSD

Reviews:

Related manuals for NAL-PC-HSD

Brands by name

Popular brands

v.link NAL-PC-HSD, Manual

Search results

Summary of Contents for NAL-PC-HSD

Reviews:

Related manuals for NAL-PC-HSD

Brands by name

Popular brands