Suzuki Liana RH413, Service Manual

Page: 742 / 1302

5B-33 Manual Transmission/Transaxle:
Gear Shift Shaft Components
S3RH0A5206021
Gear Shift Shaft Disassembly and Assembly
S3RH0A5206022
High Speed and Low Speed Gear Shift Shaft
1) Using feeler gauge, check clearance between fork
(1) and sleeve (2) and replace those parts if it
exceeds limit of 1.0 mm (0.039 in.).
NOTE
For correct judgement of parts replacement,
carefully inspect contact portion of fork and
sleeve.
Clearance “a” between fork and sleeve
Service limit: 1.0 mm (0.039 in.)
2) Insert each gear shift shaft into case and check that
it moves smoothly. If it doesn’t, correct by using
oilstone, reamer or the like.
5th and Reverse Gear Shift Shafts
Disassembly
Disassemble component parts by using spring pin
remover and hammer.
Special tool
(A): 09922–85811 4.5 mm
I3RH0A520024-01
1. Low speed gear shift shaft 4. 5th & reverse gear shift guide shaft : Tightening torque
2. High speed gear shift shaft 5. Reverse gear shift arm
3. 5th & reverse gear shift shaft 6. Gear shift locating bolt
: Apply sealant 99000-31260 to bolt thread.
I2RH01520068-01