Suzuki Liana RH413, Service Manual

Page: 1191 / 1302

Wipers / Washers: 9D-8
c) Connect battery positive (+) terminal to “c”
terminal.
d) Check that voltage between “b” and “e” terminals
changes as in below figure when disconnecting
battery positive (+) terminal from “c” terminal.
If check result is not satisfied, replace relay.
2) Check WIPER AND WASH circuit as follows.
a) Connect battery positive (+) terminal to “h”
terminal and battery negative (–) terminal to “e”
terminal.
b) Check that voltage between “b” terminal and “e”
terminal changes as below figure when
connecting battery positive (+) terminal to “d”.
If check result is not satisfied, replace relay.
c) Check that voltage between “b” terminal and “e”
terminal changes as below figure when
disconnecting battery positive (+) terminal from
“d”.
If check result is not satisfied, replace relay.
1. Rear wiper intermittent relay
1. Rear wiper intermittent relay
V
e
g
h
b
1
I3RH0A940009-01
High
Low
Voltage between “b” and “e” terminals
6 - 10 sec.
Disconnect battery positive (+) terminal from
"c" terminals
V
c
e
g
h
b
1
I3RH0A940008-01
1. Rear wiper intermittent relay
1. Rear wiper intermittent relay
High
Low
Voltage between “b” and “e”
0.6 - 1.5 sec.
Connect battery positive (+) terminal to
"d" terminals
V
d
e
h
1
b
I3RH0A940010-01
High
Low
Voltage between “b” and “e”
2.7 - 4.6 sec.
Disconnect battery positive (+) terminal from
"d" terminal.
V
1
d
e
h
b
I3RH0A940011-01