Suzuki Liana RH413, Service Manual

Page: 420 / 1302

3B-7 Differential:
Rear Differential Disassembly and Assembly
S3RH0A3206006
Disassembly
1) Remove differential cover (1).
2) Remove breather plug (2) from differential cover (1).
3) Remove differential side bearing stopper and then
remove differential side bearing retainer.
Special tool
(A): 09923-58520
4) Using some appropriate rod (1), drive out differential
side bearing outer races (2).
NOTE
When driving out differential side bearing
outer races, be very careful not to cause
damage to tooth surface of bevel gear.
5) Remove bevel gear assembly (3).
6) Remove bevel gear bolts (1) and then remove drive
bevel gear (2).
7) Remove differential side bearings (3).
8) Drive out differential side pinion shaft pin with special
tool and hammer.
Special tool
(B): 09922-85811
9) Disassemble differential side gears (2), pinions (3),
washers and shaft (4) in differential case (1).
10) Remove caulking of bevel pinion nut with special tool
and power wrench (1).
Special tool
(C): 09930-40113
9. Differential side taper roller bearing 21. Differential cover
: Apply sealant 99000-31260 to mating
surface with differential carrier.
: Apply differential oil.
10. O-ring 22. Differential side washer : Tightening torque
11. Differential side oil seal
: Apply grease 99000-25010 to seal lip.
23. Differential side gear
12. Retainer 24. Differential pinion shaft
I3RH01322019-01
I3RH01322020-01
I3RH01322021-01
I3RH01322022-01
I3RH01322023-01