8B-5 Air Bag System:
Air Bag Wire Harness and Connector in Floor Wire
Harness
Air bag wire harness is included in floor harness. The
part of coupler side wire harness can be identified easily
as it is covered with a yellow protection tube. Be very
careful when handling it.
• When an open in air bag wire harness (in floor
harness) (1) or damaged wire harness, connector or
terminal is found, replace wire harness, connectors
and terminals as an assembly.
• When installing it, be careful so that the air bag wire
harness (in floor harness) (1) is not caught or does not
interfere with other parts.
• Make sure air bag system grounding point (2) are
clean and grounds are securely fastened for optimum
metal-to-metal contact. Poor grounding can cause
intermittent problems that are difficult to diagnose.
Precautions on Disposal of Air Bag and Seat
Belt Pretensioner
S3RH0A8200003
Do not dispose of the live (undeployed) air bag (inflator)
modules and the live (inactivated) seat belt
pretensioners. When disposal is necessary, be sure to
deploy / activate the air bag and seat belt pretensioner
according to deployment / activation procedure
described in “Air Bag (Inflator) Module and Seat Belt
Pretensioner Disposal”.
WARNING
!
Failure to follow proper air bag (inflator)
module and seat belt pretensioner disposal
procedures can result in air bag deployment
and pretensioner activation which could
cause personal injury. Undeployed air bag
(inflator) module and inactivated seat belt
pretensioner must not be disposed of
through normal refuse channels.
The undeployed air bag (inflator) module and
inactivated seat belt pretensioner contain
substances that can cause severe illness or
personal injury if the sealed container is
damaged during disposal.
General Description
Air Bag System Construction
S3RH0A8201001
2
1
I3RH0A820004-01
9
2
6
7
5
1
6
8
4
3
I3RH0A820005-01
1. Driver side front seat belt assembly (with
ELR and pretensioner)
4. Passenger air bag (inflator) module
7. Buckle
2. Passenger side seat belt assembly (with
A-ELR and pretensioner)
5. Label
8. Driver side air bag (inflator) module
3. Driver air bag (inflator) module
6. Retractor assembly
9. Passenger side air bag (inflator) module
Summary of Contents for Liana RH413
