Suzuki Liana RH413, Service Manual

Page: 473 / 1302

Brake Control System and Diagnosis: 4A-15
Master Cylinder Components
S3RH0A4106010
NOTE
The figure shows LH steering vehicle.
Master Cylinder Reservoir Removal and
Installation
S3RH0A4106011
Removal
1) Disconnect fluid level switch coupler on reservoir.
2) Clean outside of reservoir.
3) Take out fluid with syringe or such.
4) Remove reservoir pin (1) by using special tool (A).
Special tool
(A): 09922-85811
5) Remove reservoir (2).
CAUTION
!
Brake fluid is extremely damaging to paint.
Do not allow brake fluid to get on painted
surfaces.
I2RH01410020-01
[A]: For vehicle without ABS
For RH steering vehicle with ABS
5. Piston cup: Apply brake fluid. Confirm
installing direction.
11. Secondary piston stopper bolt (for LH steering
vehicle)
[B]: For LH steering vehicle with ABS 6. Secondary piston pressure cup
: Apply brake fluid. Confirm installing
direction.
12. Master cylinder body
1. Piston stopper circlip 7. Piston cup: Apply brake fluid. Confirm
installing direction.
13. O-ring
2. Piston stopper 8. Secondary piston 14. Piston stopper pin
3. Cylinder cup: Apply brake fluid. Confirm
installing direction.
9. Return spring secondary seat : Tightening torque
4. Primary piston 10. Secondary piston return spring : Do not reuse.
I2RH01410021-01