Cabletron Systems Netlink FRX8000, User Manual

Page: 194 / 468

13-4 FRX8000 3. 0 User G uide, Rev 02
●
Type
prof nnn [Enter]
(where
nnn
is a profile name) at the async terminal, the
specified profile will be loaded.
●
If none of the above is done, a change will take effect at the next IPL of the node
containing the port.
PAD Profile Parameters
When specifying characters that will perform functions (i.e.,
Data Forwarding
or
Character Delete
), be sure to specify these as
different characters.
Usage
is used as an identifier. It is not an X.3 parameter, and is not used by the FRX8000.
Table 13-1 Async PAD Profile Parameters
Parameter Valid Values STD90 STD91
Usage 1–30 uppercase characters STD90 STD91
01 PAD Recall Char acter 0–126 1 0
02 Echo Y/N Y N
03 Forwarding Characters 0–127 126 0
04 Idl e Del ay (1/20 sec) 0–255 0 20
05 Device Contr ol 0–2 1 0
06 PAD Ser vice Signals 0–5 1 0
07 Break Signal Oper ation 0–31 2 2
08 Discard Output Y/N N N
09 Pad after <cr> 0–255 (characters) 0 0
10 Line Folding 0–255 0 0
11 Speed n/a–determined in port configuration.
12 Flow Control Y/N Y N
13 LF after CR 0–7 0 0
14 Pad after LF 0–255 (characters) 0 0
15 Edi ti ng Y/N N N
16 Character Delete 0–127 127 127
17 Line Delete 0–127 24 24
18 Line Display 0–127 18 18
19 Service Si gnal Edi ti ng 0–126 1 1
20 Echo Mask 0–255 0 0
21 Parity Treatment 0–3 0 0
22 Page Wait 0–255 (linefeeds) 0 0