Cabletron Systems Netlink FRX8000, User Manual, Page: 244 / 468

15-20 FRX8000 3. 0 User G uide, Rev 02
Router
Is the hex value of the node address of the router that will forward a packet when this
route is used. If Novell's IPXWAN protocol is used on the interface (as configured in
the IPX Interface file), this field will be ignored.
Interface
is the IPX network number assigned to the interface used.
SAP Route Parameters
Service Number
identifies this specific service at the node defined by Node Number. Service numbers
do not have to be consecutive, or unique to the entire internetwork.
Service Type
is a SAP Service Type code. Some common types are:
0003
= print queue
0004
= file server
0005
= job server
0007
= print server
0009
= archive server
0024
= remote bridge server
Server Name
identifies a specific server in the IPX internetwork.
Server Network Address
is an IPX network number assigned to the network containing the server identified by
Server Name
.
Server Node Address
identifies the IPX node attached to the server network.
Server Socket Number
is an IPX socket number that identifies the process. For example, the SAP process is
0452
.
Intervening Networks
is the number of routers that a packet must pass through to reach the server, if this
route is used.
Router
is the hex value of the node address of the router that will forward a packet when this
route is used. If Novell's IPXWAN protocol is used on the interface (as configured in
the IPX Interface file), this field will be ignored.
Interface
is the IPX network number assigned to the interface used to send packets that are des-
tined for this server.