Cabletron Systems Netlink FRX8000, User Manual, Page: 352 / 468

21-30 FRX8000 3. 0 User G uide, Rev 02
Meaning: This is used as an LP diagnostic aid. If a diagnostic flag is
turned on, this message reports the current link state.
197.
X25 LP “n” Port “n” received FRMR, WXYZ= “n,” control field=”n”
V(s)=”n,” V(r) = “n,” CMD/RSP=”n”
Severity: 2
Meaning: The LP HDLC frame processor task received a frame reject
(FRMR) response to a previously transmitted frame.
Action: The system recovers automatically from this error, however,
if the message is repeated, it may mean that you have a bad
communications line.
198.
X25 LP “n” Port “n” received SABM or DISC with wrong address.
Check DTE/DCE configuration
Severity: 4
Meaning: The HDLC frame processor task for the port has received an
improperly addressed frame from the subscriber. This situation
usually occurs when the port and subscriber devices are both con-
figured as logical DCEs or logical DTEs.
Action: Modify the Port record so that one end of the connection is a logical
DCE and the other is a logical DTE.
199.
Group call from “n” to “n” cleared – cause “n” diag “n”
Severity: 4
Meaning: Self-explanatory. The cause and diagnostic codes are standard X.25
codes. (See
Appendix D .)
204.
Error in configuration download to node “n”
Severity: 2
Meaning: Self-explanatory.
Action: Try the download again. If it still does not work, contact Cabletron
Systems Technical Support . (See page 21-7.)
205.
Error in software download to node “n”
Severity: 2
Meaning: Self-explanatory.
Action: Try the download again. If it still does not work, contact Cabletron
Systems Technical Support . (See page 21-7.)
206.
Configuration download to node “n” completed successfully
Severity: 4
Meaning: Self-explanatory.
207.
Software download to node “n” completed successfully
Severity: 4