Cabletron Systems Netlink FRX8000, User Manual

Page: 103 / 468

Configuring Inter-Nodal Trunks 7-23
Configuring Telephone Numbers
The Telephone Number file contains telephone numbers for any dial-up subscribers
on the network (if the network is equipped with supported auto-dial hardware).
Telephone numbers are used to place calls to other subscribers.
Press
[H]
at the Connections and Routing Paths Configuration Menu (or
[A], [F], [H]
from the Main Menu.) When prompted, enter:
●
Telephone number
:
1–12
digits. (Default =
0
.)
●
Any other requested information, noting the values in Table 7-6 . (Press
[Enter]
at a prompt to specify the default.)
Figure 7-9 Telephone Number Record
[A],[F],[H]
from Main Menu
When Changes Take Effect
When you add a new Telephone Number record, the change is written to the database
as soon as you enter the final parameter value. When you modify a parameter in an
existing record, the change is written to the database instantly.
The database change becomes effective at the port as soon as the next call is placed.
(The change will not affect a call in progress.)
Telep hone N umber File Maintenance
* Telephon e Numb er 18005551212
A Node I D 10 n mp10
B Mod em Pool ID 11
C Lin e Speed Code 9 4800 bp s
D Alternate N ode 1 10 n mp10
E Alternate N ode 2 21 n mp21
F Alternate N ode 3 26 d ppm26
G Alternate N ode 4 0 *** Not In Datab ase
H Alternate N ode 5 0 *** Not In Datab ase
I Alternate N ode 6 0 *** Not In Datab ase
1 Facilities In fo
S elect: