Cabletron Systems Netlink FRX8000, User Manual

Page: 413 / 468

Cause and Diagnost ic Codes D-3
Diagnostic Codes
Network-Generated Codes
These diagnostic codes are generated by the network in Clear, Reset, and Restart Indi-
cation packets, as well as Registration Confirmation and diagnostic packets:
Hex. Dec. Description
00 00
No additional Information
01 01
Invalid P(s)
02 02
Invalid P(r)
10 16
Packet Type Invalid
(Restart Transfer Phase)
11 17
Packet type Invalid for State r1 Packet Level Ready
12 18
Packet type Invalid for State r2 DTE Restart Request
13 19
Packet type Invalid for State r3 DCE Restart Indication
(Call Setup Phase)
14 20
Packet type Invalid for State p1 Ready
15 21
Packet type Invalid for State p2 DTE Waiting
16 22
Packet type Invalid for State p3 DCE Waiting
17 23
Packet type Invalid for State p4 Data Transfer
18 24
Packet type Invalid for State p5 Call Collision
(Call Clearing Phase)
19 25
Packet type Invalid for State p6 DTE Clear Request
1A 26
Packet type Invalid for State p7 DCE Clear Indication
(Reset during data xfer)
1B 27
Packet type Invalid for State d1 Flow control Ready
1C 28
Packet type Invalid for State d2 DTE Reset Request
1D 29
Packet type Invalid for State d3 DCE Reset Indication
20 32
Packet not allowed
21 33
Unidentifiable packet
22 34
Call on one-way LCN
23 35
Invalid packet type on PVC
24 36
Packet on unassigned LCN
25 37
Reject not subscribed to
26 38
Packet too short
27 39
Packet too long
28 40
Invalid GFI
29 41
Restart with non-zero bits 1-4 in octet 1, or 1-8 in octet 2
2A 42
Packet type not compatible with facility
2B 43
Unauthorized interrupt confirmation
2C 44
Unauthorized interrupt
2D 45
Unauthorized reject
2F 47
No channel available