Cabletron Systems Netlink FRX8000, User Manual

Page: 370 / 468

21-48 FRX8000 3. 0 User G uide, Rev 02
394.
PVC on LP “n” Port “n” LCN “n” disconnected from Node “n” LP “n”
Port “n” LCN “n”
Severity: 4
Meaning: Self-explanatory.
395.
PVC setup failure on LP “n” Port “n” LCN “n” to Node “n” LP “n” Port “n”
LCN “n”
Severity: 3
Meaning: Self-explanatory. The reason is probably an invalid PVC type or
port.
Action: Review and change the configuration.
396.
Node “n” has more than 64 neighbor node
s
Severity: 3
Meaning: Self-explanatory. Each FRX8000 node can connect, via trunks, to up
to 64 “neighbor” nodes. (A neighbor is the closest node in a path
from the “home” node.)
Action: Remove the necessary number of trunks from the node.
397.
X25 Trunk PVC not defined for Node “n” LP “n” Port “n”
Severity: 3
Meaning: Self-explanatory. If the specified port is configured (in its Port
record) to be one end of a PVC, one or more PVC Connection
records must also be created.
Action: Configure the necessary record(s).
398.
On-line update of SNMP parameters on Node “n”
Severity: 4
Meaning: Self-explanatory.
399.
LP “n” Port “n” Disable Request Failed
Severity: 2
Meaning: A request was sent to disable a port that is not recognized, because
the protocol configured in the Port record is not installed on the LP.
Action: Configure the LP record to install the protocol specified in the Port
record, or configure an installed protocol on the port.
400.
Link Enabled
Severity: 2
Meaning: The port has been enabled from the On-Line Port Operations Menu.
Action: None.
401.
Link Disabled
Severity: 2