Cabletron Systems Netlink FRX8000, User Manual, Page: 373 / 468

Alarms 21-51
415.
End of Congestion, “n” events lost
Severity: 4
Meaning: Self-explanatory.
416.
PAD Autocall Retries Exhausted
Severity: 3
Meaning: The async PAD retry timer has expired without a connection being
established.
Action: None; however, if this occurs with any frequency, you may want to
increase the timer (
Retry Count
) or check the remote async device for
problems.
417.
Frame Relay Link Failed
Severity: 2
Meaning: The physical link is down.
Action: Check the cables for secure connections and proper operation.
418.
LP “n” Port “n” Configuration Change Request Failed
Severity: 2
Meaning: An on-line change was attempted on a port that is not recognized,
because the protocol configured in the Port record is not installed on
the LP.
Action: Configure the LP record to install the protocol specified in the Port
record, or configure an installed protocol on the port.
419.
LP “n” Port “n” Get Configuration Request Failed
Severity: 2
Meaning: A status request was made for a port that is not recognized, because
the protocol configured in the Port record is not installed on the LP.
Action: Configure the LP record to install the protocol specified in the Port
record, or configure an installed protocol on the port.
420.
LP “n” Port “n” Configuration Change Request Successful
Severity: 4
Meaning: An on-line change to the Port record was successful.
421.
LP “n” Port “n” Get Configuration Request Successful
Severity: 4
Meaning: The software requested and received parameter values for a status
display.
422.
LP “n” Port “n” Configuration Change Rejected, Port Not Disabled
Severity: 2