Cabletron Systems Netlink FRX8000, User Manual

Page: 71 / 468

Configuring LPs and LAN Cards 6-11
When Changes Take Effect
When you add a new LP record, the change will be written to the database as soon as
you enter the final parameter value. When you modify an existing record, the change
will be written to the database immediately.
The change will become effective at the LP in one of the following ways:
●
A change to an LP in an ICP, INM, or NMP node is immediately effective when
the database record is changed.
●
A change to LP 0–3 in a DPPM node, can be implemented by performing a
Configuration Update ( [B], [B], [D], [A] from the Main Menu) to the node con-
taining the LP.
Be sure to perform the update to a DPPM node before the node
undergoes a re-IPL.
●
A change to LP 4–7 in a DPPM node will take effect at the next IPL of the node
containing the LP.
T1 LP Parameters
LP Type
Although pressing [?] for help displays a range of 1–6 , the supported types are:
3 = AST Card 4 = T1/E1 6 = RLP-7000 Node
Model Type
Although pressing [?] for help displays a range of 0–3 , the valid types are:
0 = CSU 1 = DSX-1
Table 6-4 N74/7500 T1 LP Parameters
Parameter Valid Values Default Value
LP Type 4 (not valid here)
Model Type 0
(CSU),
1
(DSX-1)
0
Coding 0–2 2
Fr aming 0–1 1
Li ne Service 0–1 0
Li ne Build O ut 1–5 1
Cl ocking
CSU: 0
DSX-1:
1
0 (if CSU),
1
(if DSX-1)
Expansion LP Attached Y/ N N