Cabletron Systems Netlink FRX8000, User Manual, Page: 341 / 468

Alarms 21-19
118.
PVC removed–Node “n” Line “n” LCN “n” to Node “n” Line “n” LCN “n”
Severity: 4
Meaning: The PVC has been disconnected using the On–line PVC Delete
operation. The acknowledgment was received after the gcon
program stopped waiting (per operator intervention). The pvcgen
program reported the acknowledgment. The subscriber IDs are not
reported because pvcgen does not have access to them.
119.
PVC remove failure-Node “n” Line “n” LCN “n” to Node “n” Line “n” LCN
“n” - Reason “n”
Severity: 3
Meaning: The PVC could not be disconnected for one of these reasons:
3
– Local end of PVC does not exist
4
– Remote node number is wrong
5
– Remote line number is wrong
6
– Remote LCN is wrong
The acknowledgment was received after the gcon program stopped
waiting (per operator intervention). The pvcgen program reported
the acknowledgment. The subscriber IDs are not reported because
pvcgen does not have access to them.
Action: Check the PVC Connection file.
120.
Illegal Subscriber configured for Node “n” LP “n” Port “n”
Severity: 3
Meaning: Self-explanatory.
Action: Check the Subscriber and Port records.
121.
LP “n” Port “n,” PAD retry count exhausted for remote subscriber “n”
Severity: 4
Meaning: The number of times an autocall has been sent to the port has
exceeded the value set for “Maximum Retry Autocall” in the Port
record.
122.
LP “n” Port “n,” PAD received invalid configuration for local subscriber “n”
Severity: 3
Meaning: Normally, this error means that no subscriber has been configured
for this port. If one has been configured, then there is some problem
with the record.
Action: Check the Subscriber and Port records.
123.
LP “n” Port “n,” PAD received invalid configuration for remote subscriber “n”
Severity: 3
Meaning: Normally, this error means that no remote subscriber has been con-
figured for this port. If one has been configured, then there is some
problem with the record.